MS518358
NOTES:
1. Axis of hole to be normal to entry surface or provide spot face when required.
2. Unified National Class 28 or 38 threads.
3. Surface roughness: Unless otherwise specified, machined surfaces to be 125 microinches in accordance with ASME 846.1.
4. Nominal use, for installation of key - locked inserts and studs conforming to MS51830, MS51831, MS51832, NASM51833, and NASM51834, as applicable.
5. Installation procedure and installation of key - locked inserts and studs, see Figure II.
6. Remove all burrs and sharp edges.
7. Dimensions in inches. Unless otherwise specified, tolerances, linear dimensions ± .005.
8. Illustrations are for identification and are not intended to restrict designs and shapes of inserts and studs which otherwise conform to requirements.
9. This is a design standard and shall not be used as a part number.
10. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing Activity: Army - AR DLA - IS
Navy - AS
Air Force - 99
Review activities:
Army - AT, AV, CR, MI, Navy - MC
(Project 53GP-2014-001)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.dla.mil .
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business