MIL-DTL-1222J
5 PACKAGING
5.1 Packaging requirements. For acquisition purposes, the packaging
requirements shall be specified in the contract or order (see 6.2). When
actual packaging of material is to be performed by DoD personnel, these
personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the Military
Department or Defense Agency or within the Military Department's System
Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products,
or by contacting the responsible packaging activity.
6 NOTES
(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
6.1 Intended use. Fasteners meeting this specification are intended
for general, high temperature, high strength and corrosive environment
applications where a high degree of reliability is required. It is designed
to be used to acquire commercial off-the-shelf fasteners with added
inspections to verify the high degree of reliability required. Fastener
types and grades have been selected to meet diverse applications which
include: elevated temperatures, immersion in sea water, salt air/marine
environments, high preloads and high shock loadings.
6.1.1 Martensitic stainless steel fasteners. Condition "I" was
developed for martensitic corrosion resisting steel fasteners requiring
moderate strength and greater resistance to stress corrosion cracking in
moist, halogenated, sulfur containing or wet environments.
6.2 Acquisition requirements.
Acquisition documents must specify the
following:
a) Title, number, and date of this specification.
b) Part number (see 3.14), configuration, type, style, grade,
condition (see 1.2), size, length (for studs, bolts and screws),
(see 3.9.2.2), thread series, and class of fit (see 3.9.1,
3.9.1.1, 3.9.1.2) and, when needed, end configuration
(see 3.9.2.2). When a nonstandard fastener is needed, it may be
specified on a drawing. (See 1.2).
c) Issue of DoDISS to be cited in the solicitation and if required,
the specific issue of individual documents referenced (see 2.2.1
and 2.3).
d) When heat treatments do not need to be controlled in accordance
with AMS 2750 or MIL-STD-1684 (see 3.3).
e) Type of coating (see 3.6.1) and the minimum coating thickness for
all internally-threaded fasteners, all externally-threaded
fasteners with class 3A or 5 threads, and those externally-
threaded fasteners with class 2A threads that need a thicker
coating (see 3.6.3), when required.
f) When aluminum alloy fasteners are to be coated with an immersion
zinc flake/chromate dispersion coating (see 3.6.5), the coating
procedure and thickness requirements shall be provided.
g) When titanium alloy fasteners are to be coated with an inorganic
coat (see 3.6.6).
h) When cut or ground threads are not permitted.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business